Handheld Electric Bottle Capping Machine Screw Cap Capper Sealing Sealer Tool US

Description

Handheld Electric Bottle Capping Machine Screw Cap Capper Sealing Sealer Tool US
Beschreibung
Description
This Capping Machine Is Made of High-quality Iron, Which Is less Prone to Damage and Guarantees a Long Service Life. Its Small Size and Light Weight Make It Easy to Carry.  It Is Ideal for Semi-automatic Lines As It Can Be Used for Efficient and Labor-saving Capping Work.
Key Features
High Efficiency:
According to Your Proficiency, You Can Screw 20 to 50 Caps per Minute, Which Is Very Efficient and Time-saving, and Suitable for Semi-automatic Assembly Lines.
Sturdy and Durable:
the Capping Machine Is Made of High-quality Iron with an Electroplated Surface, Which Is Durable, Wear-resistant, and Rust-proof, Ensuring a Long Service Life.
Low Noise:
the Motor Parameters Are Reasonably Selected, so It Runs Smoothly, and the Noise When Used Is Low. This Can Bring You a Quiet Environment.
Easy to Operate:
You Simply Press the Switch on the Capping Machine to Start Working. Once the Cap Has Been Tightened, the Machine Stops Working When the Hand Is Released, so You Can Easily Master the Operation Process.
Comfortable to Use:
the Capping Machine Is Ergonomically Designed for a Comfortable Grip Which Allows Long Working Hours Without Strain.
Forward and Reverse Spin Design:
the Machine Is Equipped with a Knob to Adjust the Direction of Spin, Which Can Be Used to Both Tighten and Unscrew Bottle Caps, Making It Very Practical and Convenient.
Labor Saving:
with Its Powerful Torque, It Allows You to Easily Tighten and Loosen Bottle Caps with less Effort than the Traditional Hand-screwing Method.
Guaranteed After-sales Service:
We Aim to Provide Quality Products and Services. If You Have Any Problems, Please Feel Free to Contact Us, We Will Reply and Solve the Problem for You As Soon As Possible.
Details
Spring Balancer:
It Is Equipped with an Iron Spring Balancer with a High Load-bearing Capacity and Good Stability. It Is Used to Hang a Capping Machine for Easy Access and Use and Saves some Space in Your Workshop.
Silicone Rings:
This Handle Capping Machine Is Equipped with 4 Different Sizes of Silicone Rings, Which Enable Flexible Tightening of Different Cap Sizes to Suit Your Needs. Its Soft Rubber Material Effectively Prevents Damage to the Cap.
Application
It Is Suitable for the Round Cap with a Diameter of 10-50mm/0.39-1.96inch.
Specification
Material: Aluminum, Iron, Silicone
Power Voltage: Air Compressor to Provide
Working Method: Pneumatic Capping
Idle Speed: 9000r/Min
Air Pressure: 6kg/M2
Suitable Pressure: ≥0.6mpa
Fit Botter Height: All
Cap Diameter: 10-50mm/0.39-1.96in
Capping Speed: 20-50pcs/Min
Applied Bottle Height: Unlimited
Torque: 5-45kgf/Cm
Weight: 2kg/4.4lbs
Packing Size: 31*15*14cm/12.2*5.91*5.51in
How to Install
1. Unscrew the Upper Cover.
2. Install the Silicone Rubber Ring.
3. Tighten the Upper Cover.
4. Insert the Head of an Electric Screwdriver into the Cover Hole.
5. Tighten the Screws to Secure the Cover.
6. Installation Is Complete.
Package Included
1* Handle Capping Machine
4* Silicone Rings
2* Aluminum Capping Heads
1* Spring Balancer
All Accessories for Use
Notes
1.Before Using the Machine, Please Select a Suitable Capping Head, Then Adjust the Tolerance and Torque Adjuster of the Capping Head Position to Meet the Capping Strength. Finally Check All the Screws of the Machine to Ensure That They Are Not Loose and Tighten Them with a Tool If Loose.
2. Keep Other Products Away from the Machine, to Avoid Stopping the Machine Move.
3. After Use, Please Turn off the Power to Avoid Other Trouble.
4. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
shipping notice
Can't not ship to Puerto Rico,Alaska/Hawaii
Brand
Unbranded/Generic
MPN
Does Not Apply
Fit Botter Height
ALL
Suitable Pressure
≥0.6MPA
Air Pressure
6kg/m2
Idle Speed
9000R/Min
Twisting Force
5-45Kgf.cm
Working Method
Pneumatic Capping
Capping Diameter
10 - 50 mm
UPC
Does not apply
On Jun 7, 2024 at 03:32:07 PDT, seller added the following information: